LED Light Professional Garage Spray Booth , Rear Side Draft Paint Booth
1. Infrared spray booth, don’t need a diesel as fuel ,only environmental infrared lamps for heating.
2. All panels are tongue and groove interlock structure
3. 10 units short wave infrared lamps for heating
4. Quality brand-name belt drive fans
5. Spray booth specific, dual voltage LED light fixtures
6. Booths include installation instructions, fan, motor and drive, fasteners, hardware, and sealant necessary for assembly
7. Infrared fixed on wall, separate control, energy save.
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the booth which brings clean,
symmetrical and steady-going down airflow for spraying, After painting, the infrared heating separate control to dry the item, until the temperature up to setting valve. Afterwards, the air with little benzene will be released to the atmosphere after being filtered by the air filter.
6900×3900×2650 mm (L×W×H)
Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, blue colour, door head and two batten on both sides blue colour.
1 units, 650×1800mm (W×H), colour: white.
No, rear side draft type.
Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Ceiling Lights: 8Units×4Pcs=32Pcs×16W, no side lights: 8Units×2Pcs=16Pcs×7W, with LED, lighting boxes are powered coated.
On the roof, intake from side upper, exhaust from rear upper, galvanized steel frame; blue machine-made panel covered, filled with heat preservation material inside.
Inlet and outlet system
Inlet: 1×5.5KW belt drive fan, air capacity for each fan: 18000m3/h.
Outlet: 1×5.5KW belt drive fan, air capacity for each fan: 18000m3/h, 4m ducts, 1 pcs 900 bend.
10 sets infrared heating, with magnetism sensor, 3PCS/set, 1KW/PCS, halogen tube, total power: 30KW, max temperature 80℃.
Pre-filter, ceiling filter, fibreglass filter.
Spraying, baking, time setting, lighting switch, thermostat, power supply switch, emergency stop, all motors is normal start.