2) Saving energy and environment protection. The energy of led is 1/10 of the Traditional halogen lamp, it can better protect the electron circuit and save Oil. 3) Flexible viewing angle, Long lifespan, Low power consumption 4) Various colors and lens types available, unique design 5) High ability of shock resistant; Brighter light; Low temperature. 6) Available Colors: Red, Yellow, White, Green, Blue, etc. 7) RoHS Compliant decide excellent quality
• 3 years warranty
• 24 hours for your service
• your have any product question,we can all answer
• ready for your to solve the problem
Color Rendering Index
Absolute Maximum Rating
Pulse Forward Current
-40ºC To +85ºC
-40ºC To +85ºC
Reflow Soldering: 260ºC Hand Soldering : 350ºC
for 10sec. for 3sec.
● Typical optical characteristics curves
●Intensity Bin Limit (IF = 150 mA)
Flux(lm) for reference
●VF Bin Limit (IF = 150 mA)
●Requirements for application and reflow soldering
120 seconds Max.
10 seconds Max.
Refer to Temperature-profile
After reflow soldering rapid cooling should be avoided
Temperature-profile(Surface of circuit board)
Use the following conditions shown in the figure.
<Pb-free solder> <Lead solder>
1. Reflow soldering should not be done more than two times
2. 2.When soldering,do not put stress on the LEDs during heating
Packaging & Delivery
4000pcs/reel, each reel Anti-static vacuum Bag
Shipped in 3-5 days after payment
Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and Second soldering process.
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.All devices, equipment and machinery must be properly grounded.Damaged LEDs will show some unusual characteristics such as the forward voltage becomes lower, or the LEDs do not light at the low current. Criteria : (VF > 2.0V at IF=0.5mA)
3)Moisture Proof Package
It is recommended that moisture proof package be used .
Before opening the package ,The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be used within a year.
5)After opening the package, The LEDs should be soldered within 24 hours (1days) after opening the package.