Product Details
Hot Knife EPS Foam Cutter with Air-cooling System
1.Hot Knife EPS Foam Cutter with Air-cooling System Applications KD-7X Hot Knife a real professional-grade hot cutting tool for foamed plastics. The KD-7X Hot Knife heats up in seconds and gives the operator temperature control. Never before has working with foamed plastics been this easy, inexpensive and free of mess.
2.Hot Knife EPS Foam Cutter with Air-cooling System Applications
-
KD-7X is the First Hot Knife with Air-cooling System in the world.
-
KD-7X is 2 Times Faster than all of existing hot knife for cut EPS foam board
-
KD-7X is the First Continuously Operated Hand-Hold Hot Knife.
Recommended Use
Expanded Polystyrene (EPS), Extruded Polystyrene (XPS), Polyethylene, Cross-Linked Polyethylene, Polypropylenes, and many other foamed plastics and materials can be easily cut with KD-7X Hot Knife. Check with the foam manufacturer for safe and proper cutting procedures.
SpecificationINPUT: 230 Volts
OUTPUT: Max. 330 Watts
Continuously Operation is workable
WEIGHT: 610 g
LENGTH: 340mm
WIDTH: 44mm
TEMPERATURE: 500ºC
24 hours Continuously Operation, Not intermittent(Air-cooling Hot Knife with 20cm blade for cutting EPS/XPS)
|
EPS foam board |
XPS foam board |
Cutting Length |
100cm |
100cm |
Foam Thickness |
20cm |
20cm |
Foam Density |
15Kgs/M³ |
32Kgs/M³ |
Cutting speed (Inc.preheating time)
|
32 seconds |
52 seconds |
About Canty