Home »Products »Industrial Equipment & Components »Pump & Vacuum Equipment »Pressure Pump
TitleProduct

Electric Hydraulic Pump 10000 Psi Driven Hydraulic Pump

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Shanghai

  • Validity to:

    Long-term effective

  • Last update:

    2017-07-24 05:10

  • Browse the number:

    45

Send an inquiries

Company Profile

Shanghai Sihao Machinery Equipment Co., Ltd.

By certification [File Integrity]

Contact：Ms. Vevor(Mr.)  

Email：

Telephone：

Phone：

Area：Shanghai

Address：Shanghai

Website： http://micvevor.shzh-rubber.com/

Product Details


Electric Hydraulic Pump 10000 PSI Driven Hydraulic Pump Double Acting Manual Valve Electric Driven Hydraulic Pump with Solenoid Valve Oil
 

This electric oil pump is composed of three-phase asynchronous motor, high-pressure oil pump and fuel tank. It has the advantages of small size, high pressure, light weight, simple structure and easy to use. The pump is equipped with pressure gauge so as to observe the pressure when the pump is working at any time. so that users can observe the work of changes at any time. Foot switch can be configured according to user needs.

Appication: 
1. The pump can be used for a variety of hydraulic equipments.
2. If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency.

Operation method: 
When using, you should open the import and export of hand wheel, plug in the power supply, and connect the quick joint of pump to the quick joint of the equipped hydraulic tool. Press the power switch to turn on the power, after the motor rotates for 1-2 minutes, you should close the oil hand wheel, and place the pump in the supercharged state. At this time, with the increase of the load the output hydraulic oil is of self pressurization to carry out the work until 63MPA.
After the work is finished, you should open the oil hand wheel. When the hydraulic oil is over, remove the quick joint cover, turn on the air release nut, and turn off the power supply.



Maintenance: 
1. The pump uses the 15th hydraulic oil.
2. Oil storage capacity must be above oil immersion lens.
3. Each time refueling oil, you must use more than 80 mesh oil filter. It is needed to clean the fuel tank, and oil change period of six months.
4. Oil temperature ranges form 10 degrees Celsius to 50 degrees Celsius during working.
5. Open the oil hand wheel before starting the electric pump, placed in unloading position.
6. If the motor temperature is too high, you should stop it. After it is self-cooling, you can use it again.
7. The pump has been adjusted before ex-factory. No need to readjust. Readjustment must be carried out by means of a pressure gauge.
8. High pressure oil pipe has been tested under the pressure of 105MPA before ex-factory. But the user should often check it because of hose aging. Generally used for six months, frequently used for three months.
9. The bearing should be cleaned every six months, and you should add grease when the bearing is assembled.
 
 
 
  • Easy to operate and high safety
  • Electromagnetic valve controlto pull back piston at any position
  • High and low speed for quick oil output.Turbine oil absorption to ensure max. effective oil volume
  • Overpressure unit of pressure safety valve to avoid over pressure damage or extremely pressured. At 700kg/cm2,pressure releaseautomatically
  • High pressure is for driving piston, low pressure is for piston reset
  • Oil pipe coupling is fitted with PT3/8" thread
  • Model: DYB-63B-2
  • Input voltage: 110V 60HZ
  • Function: Double-acting, manual valve
  • Working pressure: 63MPA
  • Flow: 1L/Min
  • Oil capacity: 8L
  • Motor power: 0.75KW
  • Machine size: 380x 300 x51MM
  • Weight: 25KG


Contact us :