Send inquiry
1 working under -5 to 40 degree
2 safe soundless demolition
3 no need license
4 short delivery time
5 demolition agent
Non Explosive Rock Demolition Agents
Non Explosive Rock Demolition Agents is a highly expansive mortar to demolish and cut rocks and concretes. It swells when poured into a hole and develops a pressure higher than 80MP(800kg/cm2) on the hole walls after mixed with clean and cold water, thereby breaking them open. Splitstar is environmentally friendly because it releases no toxic fumes or harmful substances of any kind. So it is called a Highly Soundless Cracking Agent(HSCA). It is non-explosive; Therefore supervision of trained personnel is not essential.
Features:
1. Controlled Demolition
2. Dust-free
3. Vibration Free
4. No License Required
5. No Flying Debris
6. Envireonmental Friendly
7. Silent Operation
8. Rapid Usability
9. Ecomomy
10. Safety for Vicinity
It's not Explosive
Pre-drilled hole design table:
Consumption:
2 safe soundless demolition
3 no need license
4 short delivery time
5 demolition agent
Non Explosive Rock Demolition Agents
Non Explosive Rock Demolition Agents is a highly expansive mortar to demolish and cut rocks and concretes. It swells when poured into a hole and develops a pressure higher than 80MP(800kg/cm2) on the hole walls after mixed with clean and cold water, thereby breaking them open. Splitstar is environmentally friendly because it releases no toxic fumes or harmful substances of any kind. So it is called a Highly Soundless Cracking Agent(HSCA). It is non-explosive; Therefore supervision of trained personnel is not essential.
Features:
1. Controlled Demolition
2. Dust-free
3. Vibration Free
4. No License Required
5. No Flying Debris
6. Envireonmental Friendly
7. Silent Operation
8. Rapid Usability
9. Ecomomy
10. Safety for Vicinity
It's not Explosive
| Type of SPLIT AG | Usable temperature |
| SCA-1 | 25°C-40°C |
| SCA-2 | 10°C-25°C |
| SCA-3 | -5°C-10°C |
Pre-drilled hole design table:
| Material | Hole design | ||
| Diameter(mm) | Hole spacing | Depth | |
| Soft stone quarrying | 28-38 | 200-300mm | 105% of height |
| Hard stone quarrying | 30-40 | 200-300mm | 105% of height |
| Plain concrete | 30-40 | 300-500mm | 80% of height |
| Reinforced concrete | 35-40 | 150-300mm | 90% of height |
Consumption:
| Hole diameter(mm) | 30 32 34 36 38 40 42 44 46 48 50 |
| Consumption(kg/m³) | 1.2 1.3 1.5 1.7 .1.9 2.1 2.3 2.5 2.8 3.0 3.2 |
| Hole depth(m) | 1 |