Send inquiry
| Technique Parmeters | ||||
| /System | /Item | /Unit | /Basic Paramters | |
| KLB75DM | KLB80DM | |||
|
Basic Spec |
Plastic fit for | PE PP PVC PA… | ||
| Max hollow product volume | L | 7 | 10 | |
| Diehead amount | set | 1,2,3,4,6 | 1,2,3,4,6,8 | |
| (Size(LXWXH) | M | 4.18x2.26x2.5 | 4.18x2.26x2.5 | |
| Weight | ton | 7.2 | 7.5 | |
| Clamping System | Clamping force | kN | 110 | |
| Template distance | mm | 200-520 | ||
| Template stroke | mm | 320 | ||
| Max template size(LXWXH) | mm | 580x450 | ||
| Mould thickness | mm | 210-250 | ||
| Extrusion System |
Screw Dia | mm | 75 | 80 |
| Screw L/D ratio | L/D | 24 | 24 | |
| (HDPE)Plasticizing capacity(HDPE) | Kg/h | 110 | 130 | |
| Screw heating zone | zone | 3 | 4 | |
| Screw heating power | kW | 12.2 | 13.6 | |
| Screw fan's power | kW | 0.42 | 0.56 | |
| Extrusion motor's power | kW | 30 | 30 | |
| Die head | Diehead heating zone | zone | 2 | 2 |
| Diehead heating power | kW | 6.5 | 10 | |
| Sprue-die dia(max) | mm | 130 | 140 | |
| Power | General power | kW | 60 | 65 |
| Oil-pump motor power | kW | 11 | 11 | |
| Air pressure | Mpa | 0.6-0.8 | 0.6-0.8 | |
| Average power | kW | 38 | 40 | |
| Compressed air dosage | m3min | 0.4 | 0.4 | |
| Cooling water dosage | L/min | 50 | 50 | |
